Supreme PMO composite waterproofing method
Supreme PMO composite waterproofing method is made by inserting fiberglass woven fabric with excellent dimensional stability and tensile strength.
Factory produces a special coating material with excellent stickiness on rubber asphalt sheets with cold resistance and elastic recovery ability.
It is integrated into a composite sheet to form a solid primary waterproofing layer with Supreme Asphalt Adhesive, which has excellent penetration and adhesion.
A complex method is applied to apply Supreme SM Coat, which is a combination of organic compounds of urethane and asphalt, to the sheet joints and the entire upper surface.
It is a composite waterproofing method that allows for quick and uniform quality construction by ensuring excellent adhesion to the substrate, securing water tightness at joints, and forming a uniform thickness.
Secured cold
resistance -20℃
Securing behavior traceability
Ensure
excellent adhesion
Improving the performance of existing film waterproofing materials
Forming a stable waterproof layer
Secured cold
resistance -20℃
Securing behavior traceability
Ensure
excellent adhesion
Improving the performance of existing film waterproofing materials
Forming a stable waterproof layer
Materials used in Supreme PMO composite waterproofing method
division | Materials | characteristic |
Primary waterproofing layer | Asphalt impregnated nonwoven fabric or Polyester non-woven fabric | Integration with film waterproofing material, Waterproof layer protection possible |
Secondary waterproof layer | high viscosity adhesive | Satisfactory low-temperature bending performance even below -20℃ and excellent physical performance such as elongation |
Third waterproof layer | low viscosity adhesive | Excellent adhesion and elastic recovery at low temperature (5℃), excellent followability to background behavior |
※Standard : 3.0mm X 1.0M X 10M
*Specifications other than those mentioned above can be changed and produced upon request from the consumer.
Supreme PMO - l Composite waterproofing method
Construction sequence
Diagram
01.Asphalt adhesive application
02.Laying smw sheets
03.Laying smw sheets
04. SM 코트 전면 도포
05.Construction completed
Supreme PMO - l l Composite waterproofing method
Construction sequence
Diagram
01.Adhesive application
02.Apply SM coat to the entire surface
03.Laying SMW sheets
04.SM coat joint application
05.Construction completed
Supreme PMO - l Composite waterproofing method
Construction sequence
Diagram
01.Asphalt adhesive application
02.Laying smw sheets
03.Laying smw sheets
04. SM 코트 전면 도포
05.Construction completed
Supreme PMO - l l Composite waterproofing method
Construction sequence
Diagram
01.Adhesive application
02.Apply SM coat to the entire surface
03.Laying SMW sheets
04.SM coat joint application
05.Construction completed
SupremeENC
Leading the way with faith and technology